Packet Filter Screen - ZyXEL Communications MSC1024G Series User Manual

Managment switch card

Hide thumbs Also See for MSC1024G Series:

Table of Contents

Table 24 OUI Filter: Slot (continued)

5.9 Packet Filter Screen

Use this screen to set which types of packets the switch accepts on individual DSL ports. Click

ACL > Packet Filter to display the screen shown next.

Figure 56 Packet Filter

The following table describes the labels in this screen.

Table 25 Packet Filter

Select the radio buttons of the types of packets to accept on the ADSL port.

MSC1000G/1024G/1224G Series User's Guide

This field displays the filter mode (deny or accept).

This field displays whether OUI filtering is activated on the specified DSL port or

not (V for enabled, - for disabled).

This field displays the OUI address to filter on a port.

Select the radio button of the port from which you want to copy settings.

Use the drop-down list boxes to select an DSL port on a line card for which you wish

to configure packet type filtering.

Click Load to display the port's current settings.

Select Accept All to allow any traffic.

Chapter 5 Access Control List Screens

Msc1224g series Msc1000g series