ZyXEL Communications MSC1024G Series User Manual page 765

Table 327 profile Commands (continued)
COMMAND
voip sip
MSC1000G/1024G/1224G Series User's Guide
set <profile> <mgc-
ip>|<mgc-dn>
[mgcport <mgc-
port>][mgc2
off|{on <mgc2-
ip>|<mgc2-dn>}]
[mgc2port <mgc2-
port>][transport
udp|tcp][encode
long|short][pbit
<pbit>][dscp
<dscp>] <profile>
show [profile]
delete <name>
dialplan <profile>
delete
dialplan <profile>
map
dialplan <profile> <index>
set [<dialplan-
table>]
dialplan
show
map <name>
Chapter 32 profile Commands
DESCRIPTION
Configures an H.248 profile.
See Section 32.19.3 on page 807
more information on this command.
The default H248 profile values are:
name: DEFVAL
mg-name: DEFVAL
mg-port: 2944
mgc-ip: 127.0.0.1
mgc-port: 2944
mgc2: off
mgc2-port: 2944
transport: udp
encoding: long
pbit: 7
dscp: 48
Displays the settings of all H248
profiles or the specified one.
Removes the specified SIP profile.
Removes the specified dial plan
profile.
Displays subscribers referenced by all
dial plan profiles or by the specified
one.
Configure dial plan related settings of
the specified profile.
<index>: The index number for an
entry in the dial plan table (1~32).
<dialplan-table>: The dialplan
table name (<=31 characters). Use the
voip dialplan set command to
set up a dialplan.
Displays the settings of all dial plan
profiles or of the specified profile.
Displays which ports use the specified
SIP profile.
P
M
for
L
M
M
L
M
L
L
765