Chapter 33 show Commands
33.3.38 show vlan Command
Syntax:
show vlan [<vid>]
or
show vlan <start-vid> <end-vid>
This command displays the current VLANs.
The following example shows VLAN 1. It is set to send untagged Ethernet frames to the
Gigabit Ethernet interfaces.
ras> show vlan
vid sub1
---- ----- ----- ----- -----
1
U
3
-
5
-
101
-
4094
T
33.3.39 show voip h248 interface Command
Syntax:
show voip h248 interface <id>
where
id
This command displays the status of the specified H.248 interface.
Here is an example.
ras> show voip h248 interface 1
get interface fail
33.3.40 show voip h248 media Command
Syntax:
show voip h248 media <id> <media>
where
id
media
This command displays the status of the specified H.248 media card.
864
sub2
up1
up2
U
U
U
-
-
-
-
-
-
-
-
-
T
T
T
The number of the H.248 interface (1~16).
The number of the H.248 interface (1~16).
The number of the media card (1~27).
MSC1000G/1024G/1224G Series User's Guide