Voip Ip Commands; Voip Ip Set Command; Voip Ip Dns Command - ZyXEL Communications MSC1024G Series User Manual

Chapter 37 voip Commands
ras> voip h248 opmode 4 mc
Sets the VOP card in slot 4 to function as a media card.
ras> voip h248 master 4 192.168.3.174 0.0.0.0
Sets the VOP card in slot 4 to use the VOP card at IP address 192.168.3.174 as the primary
signaling card and no secondary signaling card.
ras> voip h248 interface slave 1 2 192.168.3.175
Identifies H.248 interface 1's media (slave) card 2 as using IP address 192.168.3.175.
ras> port h248 term 4-1~24
Creates H.248 terminations for the ports on the VOP card in slot 4.
ras> port enable 4-1~24
Turns on the ports on the VOP card in slot 4.

37.8 Voip ip Commands

Use these commands to manage the IP address, VLAN and DNS details of the VoIP line cards.

37.8.1 voip ip set Command

Syntax:
voip ip set <slot> <ip-address>[/<netmask>] <vid>
Use this command to configure the IP address, netmask and VLAN ID of the specified voIP
line card.
The following example sets the VoIP line card in slot 4 to use the IP address 111.11.11.1 with a
24-bit subnet mask (255.255.255.0) and VLAN ID 22.
ras> voip ip set 4 111.11.11.1/24 22

37.8.2 voip ip dns Command

Syntax:
voip ip dns <slot> <dns-ip>
where
<dns-ip>
This command sets the DNS (Domain Name Service) server IP address for the specified VoIP
line card.
The following example sets the VoIP line card in slot 4 to use the DNS server at 123.44.55.66.
ras> voip ip dns 4 123.44.55.66
950
A325 1
The IP address of the DNS server.
=
MSC1000G/1024G/1224G Series User's Guide