ZyXEL Communications MSC1024G Series User Manual page 588

Chapter 21 acl Commands
Table 306 acl Commands (continued)
COMMAND
ouifilter
pktfilter
pppoeagent
588
enable <slot-port>
mode <slot-port>
<accept|deny>
set <slot-port>
<mac>
show <slot>|<slot-
port>
delete <slot-port>
<mac-oui>
disable <slot-port>
enable <slot-port>
mode <slot-port>
<accept|deny>
set <slot-port>
<mac-oui>
show <slot>|<slot-
port>
set <slot-port>
<type>
show <slot>
clearinfo <vid>
enable <vid>
delete <vid>
disable <vid>
DESCRIPTION
Turns on the MAC filter on the
specified subscriber ports.
Sets the MAC filter actions.
Adds a MAC filter MAC address
entry.
Displays MAC filter settings.
Removes the static MAC OUI
filter.
MAC OUI (Organization Unit
Identifier) filter allows or drops
packets with MAC addresses
from specific vendors.
mac-oui: The first three octets
of the MAC address.
Deactivates MAC OUI filtering on
this port.
Activates MAC OUI filtering on
this port.
Sets the filter action.
Creates a MAC OUI filter.
mac-oui: The first three octets
of the MAC address.
Displays MAC OUI filter settings
for the specified port or slot.
Sets the packet type filter for the
specified subscriber ports.
Packet type filter allows or drops
specified packet types on the
specified subscriber ports.
type: accept-all, pppoe-only, or
any combination of ip, arp, dhcp,
eapol, pppoe, netbios, igmp
separated by a space.
Displays packet type filter
settings.
Resets PPPoE line description for
the VLAN.
Enables PPPoE line information
for the VLAN. The switch adds
the line information to PPPoE
packets for identification and
security.
Deletes PPPoE line information
settings.
Deactivates PPPoE line
information insertion.
MSC1000G/1024G/1224G Series User's Guide
P
M
M
M
L
M
M
M
M
M
L
M
L
M
M
M
M