Chapter 32 profile Commands
32.10.1 profile atm show Command
Syntax:
profile atm show [<profile>]
where
This command displays the details of the specified ATM profile or lists all of the ATM profiles
if you do not specify one.
The following example displays the DEFVAL ATM profile.
ras> profile atm show DEFVAL
atm profile: DEFVAL
traffic class: ubr
pcr
cdvt
ras>
32.10.2 profile atm set Command
Syntax:
profile atm set <atmprofile> cbr|ubr <pcr> <cdvt>
or
profile atm set <atmprofile> rt-vbr|nrt-vbr <pcr> <cdvt> <scr> <bt>
where
<atmprofile>
<ubr|cbr>
<pcr>
[cdvt]
rt-vbr|nrt-vbr
<scr>
<bt>
This command creates a profile of ATM traffic settings.
After you create an ATM profile, you can use it with the
command to assign it to a virtual circuit.
784
A profile name.
profile
: 300000
: 0
The name of the ATM profile (up to 31 English keyboard
characters). You cannot change the DEFVAL profile.
The ubr (unspecified bit rate) or cbr (constant bit rate) ATM traffic
class.
Peak Cell Rate (150~300000), the maximum rate (cells per second)
at which the sender can send cells. * sets the default value.
Cell Delay Variation Tolerance is the accepted tolerance of the
difference between a cell's transfer delay and the expected transfer
delay (number of cells). 0 to 255 cells or * for the default value.
The Real-Time Variable Bit Rate (vbr) or Non Real-Time Variable Bit
Rate (nrt-vbr) Variable Bit Rate ATM traffic class.
The Sustainable Cell Rate (150~300000) sets the average cell rate
(long-term) that can be transmitted (cells per second). SCR applies
with the vbr traffic class. * sets the default value.
Burst Tolerance this is the maximum number of cells (0~255) that
the port is guaranteed to handle without any discards. BT applies
with the vbr traffic class. * sets the default value.
port ppvc set
MSC1000G/1024G/1224G Series User's Guide
or
port pvc set