Table of Contents
Advertisement
Chapter 12 IMA Screens
Figure 205 Routed MGTPVC Configuration Example
RT
IMA-2
192.168.1.2
To configure the settings on the IES for IMA-1, make sure that you configure the Ip and
Gateway fields while configuring the other fields in the IMG > MGTPVC screen as shown
next.
Bridged MGTPVC
If the remote IMA device uses bridge encapsulated (RFC 1483) PVCs for management traffic,
you should leave the Ip and Gateway fields both 0.0.0.0 in the IMG > MGTPVC screen. An
example is shown next.
12.7.1 The MGTPVC Setup Screen
Click IMA > MGTPVC in the navigation panel to open the following screen. Use this screen
to configure management PVC settings used by an IMA group of a line card for mapping in-
band management traffic with a PVC (channel).
320
CO
IMA-1
192.168.1.1
MSC1000G/1024G/1224G Series User's Guide
M
192.168.1.3
Advertisement
Table of Contents
Troubleshooting
