ZyXEL Communications MSC1024G Series User Manual page 280

Chapter 11 Subscriber Port Setup Screens
Figure 173 Port > VoIP SIP Screen
The following table describes the labels in this screen.
Table 116 Port > VoIP SIP Setup Screen
LABEL
Slot
Port
Load
Enable
SIP or Dialplan Profile
Call Service Profile
280
DESCRIPTION
Use the drop-down list boxes to select the port on an active VoIP line card
you want to configure.
Click this to display the port's current settings.
Select the check box to activate SIP-based VoIP on the specified port.
Select the SIP profile or dial plan the port is to use. A SIP profile contains
information about a connection to SIP-based VoIP provider's servers. A
dial plan profile is a group of dial plans. A dial plan identifies specific types
of phone numbers dialed by a user, and to process the number before
transmission by deleting or adding digits according to the relevant rule. A
dial plan can also forward the call to a specific SIP server.
If you have not configured any profiles, only the default profile DEFVAL
can be selected. Configure SIP profiles in the Profile > VoIP SIP screen.
Select the call service profile the port is to use. A call service profile
contains location-related information, as well as details of the call services
available to subscribers.
If you have not configured any profiles, only the default profile DEFVAL
can be selected. Configure call service profiles in the Profile > VoIP SIP
CALLSVC screen.
MSC1000G/1024G/1224G Series User's Guide