Table of Contents
Advertisement
Chapter 13 Profile Screens
Figure 223 Alarm VDSL Profile
The following table describes the fields in this screen.
Table 155 Alarm VDSL Profile
LABEL
The top part of the screen is for profile configuration.
Name
Threshold
15 Min LOF
[0~900]
15 Min LOS
[0~900]
15 Min LOL
[0~900]
15 Min LPR
[0~900]
15 Min ES
[0~900]
15 Min SESL
[0~900]
15 Min UASL
[0~900]
15 Min Failed
Fast [0~900]
Init Failure Trap
356
DESCRIPTION
Type a name to identify the alarm profile (you cannot change the name of the
DEFVAL profile). You can use up to 31 English keyboard characters; spaces are
not allowed.
Specify limits for the individual performance counters. The system sends an alarm
trap and generates a syslog entry when one of these thresholds is exceeded. A
value of 0 disables the alarm threshold.
This field sets the limit for the number of Loss Of Frame seconds that are
permitted to occur within 15 minutes.
This field sets the limit for the number of Loss Of Signal seconds that are
permitted to occur within 15 minutes.
This field sets limit for the number of Loss Of Link seconds that are permitted to
occur within 15 minutes.
This field sets the limit for the number of Loss of Power (on the ATUR) seconds
that are permitted to occur within 15 minutes.
This field sets the limit for the number of Errored Seconds that are permitted to
occur within 15 minutes.
This field sets the limit for the number of Severely Errored Seconds that are
permitted to occur within 15 minutes.
This field sets the limit for the number of UnAvailable Seconds that are permitted
to occur within 15 minutes.
This field sets the limit for the number of failed fast retrain seconds that are
permitted to occur within 15 minutes.
Select Enable to trigger an alarm for an initialization failure trap.
MSC1000G/1024G/1224G Series User's Guide
Advertisement
Table of Contents
Troubleshooting
