35.3.5 sys client enable Command
Syntax:
sys client enable <index>
This command turns on a secured client set.
The following example turns on secured client set 1.
ras> sys client enable 1
35.3.6 sys client disable Command
Syntax:
sys client disable <index>
This command turns off a secured client set.
The following example turns off secured client set 1.
ras> sys client disable 1
35.3.7 sys client show Command
Syntax:
sys client show
This command displays the secured client settings. These are the IP addresses of trusted
computers that can manage the system and the services that they can use.
An example is shown next. A "V" in a column means that the secured client set is activated or
the services can be used for managing the system.
ras> sys client show
secured client:
idx enable start ip
--- ------ --------------- --------------- ------ --- --- ---- --- ----
1
yes
2
no
3
no
4
no
ras>
35.3.8 sys time show Command
Syntax:
sys time show
MSC1000G/1024G/1224G Series User's Guide
end ip
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
Chapter 35 sys Commands
telnet ftp web icmp ssh snmp
V
V
V
V
-
-
-
-
-
-
-
-
-
-
-
-
V
V
-
-
-
-
-
-
913