Ip Setup - ZyXEL Communications MSC1024G Series User Manual

Chapter 16 Sys Screens
Table 268 General Setup (continued)
LABEL
System Up Time
Database Version
Session Timeout
(minutes)
Session Login
Message
Use Time Server
When Bootup
Time Server IP
Address
Current Time
New Time
(hh:min:ss)
Current Date
New Date (yyyy-
mm-dd)
Time Zone
Apply
Cancel

16.5 IP Setup

Click Sys > IP Setup from the navigation panel to open the following screen. Use this screen
to configure the system and management IP addresses and subnet masks.
514
DESCRIPTION
This field shows how long the system has been running since the last time it was
started.
This field displays the time and date that the system's configuration was last saved
to the non-volatile memory. The time is in (24-hour) hour, minute and second
format. The date is in year, month and day format.
Specify how long an administrator's configuration session can remain idle before
the system automatically logs the administrator out.
Specify a note to display when users attempt to log into the system's management
interfaces.
Enter the time service protocol that a timeserver uses. Not all timeservers support
all protocols, so you may have to use trial and error to find a protocol that works.
The main differences between them are the time format.
When you select the Daytime (RFC 867) format, the system displays the day,
month, year and time with no time zone adjustment. When you use this format it is
recommended that you use a Daytime timeserver within your geographical time
zone.
Time (RFC-868) format displays a 4-byte integer giving the total number of
seconds since 1970/1/1 at 0:0:0.
NTP (RFC-1305) is similar to Time (RFC 868).
None is the default value. Enter the time manually. Each time you turn on the
system, the time and date will be reset to 2000-1-1 0:0.
Enter the IP address (or URL if you configure a domain name server in the IP
Setup screen) of your timeserver. The system searches for the timeserver for up
to 60 seconds. If you select a timeserver that is unreachable, then this screen will
appear locked for 60 seconds. Please wait.
This field displays the time you open this menu (or refresh the menu).
Enter the new time in hour, minute and second format. The new time then appears
in the Current Time field after you click Apply.
This field displays the date you open this menu.
Enter the new date in year, month and day format. The new date then appears in
the Current Date field after you click Apply.
Select the time difference between UTC (Universal Time Coordinated, formerly
known as GMT, Greenwich Mean Time) and your time zone from the drop-down
list box.
Click Apply to save the changes in this screen to the system's volatile memory.
The system loses these changes if it is turned off or loses power, so use the
Config Save on the navigation panel and then the Save button to save your
changes to the non-volatile memory when you are done configuring.
Click Cancel to begin configuring this screen afresh.
MSC1000G/1024G/1224G Series User's Guide