Dtpvc Setup Slot Screen; E1 Port Setup Screen - ZyXEL Communications MSC1024G Series User Manual

Chapter 11 Subscriber Port Setup Screens

11.29.1 DTPVC Setup Slot Screen

Click Port > DTPVC in the navigation panel to open the DTPVC Setup screen. Click an
active ADSL or SHDSL line card's ID number to open the following screen. Use this screen to
view and delete DTPVCs from the line card's DSL ports.
Figure 190 DTPVC Setup: Slot
The following table describes the fields in this screen.
Table 127 DTPVC Setup: Slot
LABEL
UP
Delete
Index
Port
VPI / VC
Profile
MUX
Type
SVID
SPri
CVID
CPri
Select

11.30 E1 Port Setup Screen

Click Port > E1 in the navigation panel to open the following screen. Use this screen to view
and configure an E1 port's settings.
300
DESCRIPTION
Click this to return to the previous screen.
Click Delete to remove the selected DTPVC(s).
This is the number of the DTPVC.
This is the number of a DSL port on the line card.
This field displays the Virtual Path Identifier (VPI) and Virtual Circuit Identifier
(VCI). The VPI and VCI identify a channel on this port.
This field displays the ATM profile that this channel uses.
This field displays the encapsulation type (llc or vc) for this channel.
This field shows that the channel is a DTPVC.
This is the service provider's VLAN ID (the outer VLAN tag) that the line card
assigns to untagged frames received on this channel.
This field displays the IEEE 802.1p priority level for the service provider tag that
the line card adds to untagged frames that come in on this DTPVC. "0" is the
lowest priority level and "7" is the highest.
This is the customer VLAN ID (the outer VLAN tag) that the line card assigns to
untagged frames received on this channel.
This field displays the IEEE 802.1p priority level for the customer tag that the line
card adds to untagged frames that come in on this DTPVC. "0" is the lowest
priority level and "7" is the highest.
Select one or more PVCs' check boxes and then use the Delete button to remove
it (or them). Use the Select All check box to select all of the PVCs for all of the line
card's ports.
MSC1000G/1024G/1224G Series User's Guide