Voip Route Show Command; Voip Sip Dialplan; Voip Sip Dialplan Delete Command; Voip Sip Dialplan Map Command - ZyXEL Communications MSC1024G Series User Manual

Chapter 37 voip Commands
<gateway-ip>
[<metric>]
This command defines a new, static IP forwarding route for VoIP traffic on the specified slot,
or edits an existing one.
The following example creates a static route to send VoIP traffic on slot 4 to destination IP
address 192.23.19.233 through a gateway at IP address 192.23.15.253.
ras> voip route set 4 192.23.19.233 192.23.15.253 5

37.9.3 voip route show Command

Syntax:
voip route show <slot>
This command displays the routing table for the specified slot. An example is shown next.
ras> voip route show 4
ip/mask
------------------ --------------- ------
192.23.15.0
192.23.19.233
192.168.1.0

37.10 voip sip dialplan

Use these commands to configure the SIP server to which a call goes.

37.10.1 voip sip dialplan delete Command

Syntax:
voip sip dialplan delete <name>
where
<name>
This command removes the specified dial plan table.

37.10.2 voip sip dialplan map Command

Syntax:
voip sip dialplan map [<name>]
952
= The IP address of the gateway that you want to send the packets through.
= The metric (hop count) of this static route.
gateway
/24 192.23.15.86
/32 192.23.15.253
/24 192.168.1.2
The dial plan table name (<32 characters).
=
metric
1
5
1
MSC1000G/1024G/1224G Series User's Guide