ZyXEL Communications MSC1024G Series User Manual page 323

Managment switch card
Hide thumbs Also See for MSC1024G Series:
Table of Contents

Advertisement

Figure 207 IMA > MGTPVC Setup: Slot
The following table describes the fields in this screen.
Table 139 IMA > MGTPVC Setup: Slot
LABEL
UP
Delete
Previous 10
Previous
Page X of X
Next
Next 10
Index
Group
VPI / VC
Profile
PVID / Priority
MUX
Ip
Gateway
Select
MSC1000G/1024G/1224G Series User's Guide
DESCRIPTION
Click this to return to the previous screen.
Click Delete to remove the selected management PVC(s).
Click Previous 10 to show the preceding 10 pages of information.
Click Previous to show the preceding screen if the information cannot be
displayed in one screen.
This identifies which page of information is displayed and the total number of
pages of information.
Click Next to show the following screen if the information cannot be displayed in
one screen.
Click Next 10 to show the following 10 pages of alarms.
This is the number of the management PVC.
This is the number of an IMA group on the line card.
This field displays the Virtual Path Identifier (VPI) and Virtual Circuit Identifier
(VCI). The VPI and VCI identify a channel on this group.
This field displays the ATM profile that this channel uses.
This field displays the service provider's VLAN ID and priority settings that this
channel uses.
The PVID here is the service provider's VLAN ID (the outer VLAN tag) that the
line card assigns to untagged frames received on this PVC.
Priority is the IEEE 802.1p priority level for the service provider tag that the line
card adds to untagged frames that come in on this PVC. "0" is the lowest
priority level and "7" is the highest.
This field displays the encapsulation type (llc or vc) for this channel.
This field displays the IP address the remote IMA device uses to connect with the
IMA line card for management traffic transmission.
This field displays the IP address a management computer uses to connect with
the IES and manage management traffic.
Select one or more PVCs' check boxes and then use the Delete button to remove
it (or them). Use the Select All check box to select all of the PVCs for all of the line
card's groups.
Chapter 12 IMA Screens
323

Advertisement

Table of Contents
loading

This manual is also suitable for:

Msc1224g seriesMsc1000g series

Table of Contents