Acl Antimacspoof Commands; Acl Antimacspoof Command; Acl Dhcprelay82 Commands; Acl Dhcprelay82 Clearinfo Command - ZyXEL Communications MSC1024G Series User Manual

Chapter 21 acl Commands
Table 306 acl Commands (continued)
COMMAND
usstorm

21.2 acl antimacspoof Commands

Use these commands to configure the Anti-MAC Spoofing feature. Anti-MAC Spoofing is a
service which detects hosts with fake or duplicated MAC addresses which attempt to access
your system.

21.2.1 acl antimacspoof Command

Syntax:
acl antimacspoof show
This command shows whether the antimacspoof feature is enabled or not.
The following figure shows an example.
ras> acl antimacspoof enable
ras> acl antimacspoof show
antimacspoof state: enable

21.3 acl dhcprelay82 Commands

Use these commands to configure the DHCP relay feature.

21.3.1 acl dhcprelay82 clearinfo Command

Syntax:
acl dhcprelay82 clearinfo <vid>
This command deletes the relay agent information settings.

21.3.2 acl dhcprelay82 enable Command

Syntax:
acl dhcprelay82 enable <vid> <mode>
590
set <slot-port>
<bcast> <mcast>
<uucast>
show <slot>|<slot-
port>
DESCRIPTION
Sets upstream broadcast storm
control limits (from 0~148810) for
the number of broadcast,
multicast, and/or unknown unicast
packets the switch receives per
second on the specified
subscriber ports. -1 means no
limit.
Displays the upstream broadcast
storm control limits for the
specified slot or port.
MSC1000G/1024G/1224G Series User's Guide
P
M
L