Igmp Filter Profile Screen - ZyXEL Communications MSC1024G Series User Manual

Chapter 13 Profile Screens
Table 159 Alarm SHDSL Profile (continued)
LABEL
New
Cancel
The bottom part of the screen lists the configured profiles.
Index
Name
Modify
Delete

13.18 IGMP Filter Profile Screen

You can use the IGMP filter profiles to control access to a service that uses a specific multicast
group (like a SIP server for example). Configure an IGMP filter profile that allows access to
that multicast group. Then assign the IGMP filter profile to ADSL ports that are allowed to use
the service.
Click Profile > IGMP Filter in the navigation panel to open the following screen. Use this
screen to configure IGMP filter profiles. Later you can apply the IGMP filter profiles to ADSL
ports in the ADSL Port Setup screens.
The DEFVAL IGMP filter profile is assigned to all ADSL ports by default. It allows a port to
join all multicast IP addresses (224.0.0.0~239.255.255.255). If you want to allow an ADSL
subscriber access to only specific IGMP multicast groups, use the IGMP Filter Profile screen
to configure a different profile and then assign it to the subscriber's ADSL port in the ADSL
Port Setting screens.
Use the top part of the screen to add or edit IGMP filter profiles. The bottom of the screen lists
the configured IGMP filter profiles.
362
DESCRIPTION
While you are modifying a profile, you can click New to start configuring a fresh
profile without saving your changes.
Click Cancel to start configuring the screen again.
This is the index number of the alarm profile.
This is the name of the alarm profile.
Select a profile's Select radio button and click Modify to edit the profile.
Select a profile's Select radio button and click Delete to remove the profile.
MSC1000G/1024G/1224G Series User's Guide