Config Show Command - ZyXEL Communications MSC1024G Series User Manual

Chapter 25 config Commands
This command saves your configuration when you are done with a configuration session. This
command saves all system configuration to nonvolatile memory. You must use this command
to save any configuration changes that you make, otherwise the system returns to its
previously saved settings when it is restarted. Save your changes after each configuration
session.
Nonvolatile memory refers to the MSC's storage that remains even if the power is turned off.
Configuration saved in the run time (volatile) memory is lost when the power is turned off.
Do NOT turn off your device while saving your configuration.

25.1.3 config show Command

Syntax:
ras> config show sys|ip|switch|port|profile|acl|vlan|multicast|all [nopause]
This command shows the configuration of the specified category.
show all settings at one time so you do not need to press a key to continue.
An example is shown next.
ras> config show ip nopause
================= ip ======================================
================= ip/show ====================
interface
--------- --------------- --------------- ----
inband
outband
gateway: 123.23.15.254
================= ip/arp =====================
ip address
--------------- ----- ----------------- ----------
123.23.14.10
123.23.14.12
123.23.14.16
123.23.14.19
123.23.14.35
123.23.14.91
123.23.14.99
123.23.14.250
123.23.15.172
123.23.15.254
arp entry: 18
================= ip/route ===================
dest
------------------ ---------- --------------- ------ ----------------
192.168.0.0/24
123.23.15.0/24
default
630
interface ip netmask
123.23.15.86 255.255.255.0
192.168.0.1 255.255.255.0
time ether address
240 00:0d:60:cb:cc:ae inband
270 00:0e:7f:a8:90:13 inband
260 00:0d:60:cb:22:4c inband
290 00:0e:7f:a9:80:70 inband
260 00:a0:c5:b2:6a:43 inband
240 00:0a:e4:0a:76:21 inband
270 00:0b:cd:fc:30:45 inband
270 00:a0:c5:8e:9d:16 inband
300 02:0e:a6:89:41:60 inband
300 00:04:80:9b:78:00 inband
interface gateway
outband 192.168.0.1
inband 123.23.15.86
inband 123.23.15.254
nopause
vid
1
-
interface
metric name
1 -
1 -
1 -
MSC1000G/1024G/1224G Series User's Guide
allows you to