Trace Route Screen; The Mlt Screen - ZyXEL Communications MSC1024G Series User Manual

Chapter 8 Diagnostic Screens
The following table describes the labels in this screen.
Table 58 IP Ping
LABEL
IP Ping

8.5 Trace Route Screen

Click Diagnostic > IP Trace Route in the navigation panel to display this screen. Use this
screen to show the path that packets take from the system to a specific IP address.
Figure 95 Trace Route
The following table describes the labels in this screen.
Table 59 Trace Route
LABEL
Trace Route

8.6 The MLT Screen

Use this screen to perform a variety of standard Metallic Line Tests on the lines connected to
VOP ports. You can also allow or prohibit line tests using diagnostic equipment connected via
the VOP's Test In and Test Out ports. Click Diagnostic > MLT. The following screen
displays.
180
DESCRIPTION
Type the IP address of a device that you want to ping in order to test a connection.
In the field to the right specify the number of times that you want to ping the IP address.
Click Ping to ping the IP address that you specified.
DESCRIPTION
Type the IP address of a device.
Click Start to perform a trace route in order to check the path that packets take to get to
the IP address that you specified.
MSC1000G/1024G/1224G Series User's Guide