Table of Contents
Advertisement
Chapter 9 Maintenance Screens
Type the path and file name of the firmware file you wish to upload in the File Path text box
or click Browse to locate it. After you have specified the file, click Upgrade.
After the firmware upgrade process is complete, use this screen to verify your current
firmware version number.
9.5 Reboot Screen
Click Maintenance > Reboot in the navigation panel to open the following screen. Use this
screen to restart the system without physically turning the power off.
Figure 108 Reboot
Use the Config Save screen first if you want to save the system's current configuration.
Otherwise, using the Reboot button will return the system to the configuration that was last
saved to nonvolatile memory.
Click the Reboot button to display the following screen.
Figure 109 Confirm Restart
Click OK.
Figure 110 Rebooting
Click OK again and wait for the system to restart. This takes up to two minutes.
192
MSC1000G/1024G/1224G Series User's Guide
Advertisement
Table of Contents
Troubleshooting
