Ima Group Statistics - ZyXEL Communications MSC1024G Series User Manual

Chapter 14 Statistics Screens
The following table describes the labels in this screen.
Table 222 IMA Statistics
LABEL
ID
State
Card Type
Uptime
Firmware

14.23.1 IMA Group Statistics

To view basic statistics for each IMA group on the selected IMA line card, click the slot
number of the line card in the Statistics > IMA screen.
Figure 311 IMA Statistics: IMA Line Card
The following table describes the labels in this screen.
Table 223 IMA Statistics: IMA Line Card
LABEL
Group
Available Cell Rate(Tx/
Rx)
Active Link(Tx/Rx)
452
DESCRIPTION
This is the slot number of an IMA line card. Click the index number of an
active line card to display a screen that lists the current status for each port on
the line card.
This field displays the line card's current operational status.
active means the line card is operating normally.
init means the MSC is initializing the line card.
disable means a manager has disabled the line card.
inactive means the line card is starting up or is not operating normally. This
could be due to the card starting, a firmware upgrade in progress or a
malfunction. See Section 39.7 on page 974
stays stuck in the inactive state.
This field displays the type of the line card.
This field displays how long the line card has been running since the last time
it was started.
This field displays the current firmware version installed on the line card.
DESCRIPTION
This is the number of an IMA group. Click the number of an IMA group to
display the detailed performance statistics about the IMA group.
The is the current data transmission (Tx) or receiving (Rx) rate in bps,
considering all links in the IMA group are in active.
This field displays the number of active upstream (Tx) and downstream (Rx)
links on the IMA group.
MSC1000G/1024G/1224G Series User's Guide
for what to do if the line card