Show Ipbpvc Interface Command; Show Ipbpvc Route Command - ZyXEL Communications MSC1024G Series User Manual

Chapter 33 show Commands
The following table describes the labels in this screen.
Table 336 IPB ARP Proxy Show Command Output
LABEL
Domain Name
ip
mac
port
vpi/vci
interface
vid
type

33.3.15 show ipbpvc interface Command

Syntax:
show ipbpvc interface [<ip/mask>|<vid>|<ip/mask> <vid>]
where
<ip/mask>
<vid>
This command displays the (run-time) downlink interfaces for the selected range of IP
addresses and/or VLAN. This table includes all the forwarding information for downstream
traffic, whether learned by snooping DHCP packets or provided manually.
An example is shown next.
ras> show ipbpvc interface
ip/mask
------------------ ---- ---- ---- --- ----
192.168.3.0/24

33.3.16 show ipbpvc route Command

Syntax:
show ipbpvc route [<domain-name>|<ip/mask>|<domain-name> <ip/mask>]
where
<domain-name>
<ip/mask>
842
DESCRIPTION
This field displays the name of the domain which has this ARP table.
This field displays the IP address assigned to the specific device.
This field displays the MAC (Media Access Control) address of the device.
This field displays the port number to which the device is connected.
This field displays the Virtual Path Identifier (VPI) and Virtual Circuit Identifier
(VCI) the device is using. The VPI and VCI identify a channel on this port.
This field displays the name of the interface the device is using.
This field displays the VLAN ID the device is using.
This field indicates whether this entry is used for upstream traffic (U, or uplink
interface) or downstream traffic (D, or downlink interface). By default, all entries
are for downstream traffic, unless the edge router is configured using the edge
router commands (see Section 31.20 on page
IP address, in dotted decimal notation. Number of bits <0..32> in the
=
subnet mask.
The ID (<1..4094>) of the VLAN.
=
vid slot port vpi vci
402 - - -
The name of the domain.
=
IP address, in dotted decimal notation. Number of bits <1..32> in the
=
subnet mask.
722).
-
MSC1000G/1024G/1224G Series User's Guide