ZyXEL Communications MSC1024G Series User Manual page 876

Chapter 34 switch Commands
34.5.3.3 switch cfm lbr enable
Syntax:
switch cfm lbr enable <giga-port>|<slot-port>
This command enables loopback testing on the specified port on a line card. The following
shows an example.
ras> switch cfm lbr enable 6-1
34.5.3.4 switch cfm lbr disable
Syntax:
switch cfm lbr disable <giga-port>|<slot-port>
This command disables loopback testing on the specified port on a line card. The following
example disables loopback testing on port 2 of the line card in slot 6.
ras> switch cfm lbr disable 6-2
34.5.3.5 switch cfm lbr show
Syntax:
switch cfm lbr show
This command displays loopback testing settings. The following shows an example.
ras> switch cfm lbr show
Giga port
---------
sub1: disable
sub2: disable
up1: disable
up2: disable
DSL port
--------
6-1: enable
6-2: disable
6-3: enable
34.5.3.6 switch cfm ma delete
Syntax:
switch cfm ma delete <md-name> <ma-name>
where
<md-name>
<ma-name>
This command deletes the specified maintenance association.
876
The maintenance domain.
=
= The maintenance association.
MSC1000G/1024G/1224G Series User's Guide