Logging Out Of The Web Configurator; System Info - ZyXEL Communications MSC1024G Series User Manual

Click Config Save in the navigation panel and then the Save button to save your configuration
to nonvolatile memory. Nonvolatile memory refers to the switch's storage that remains even if
the switch's power is turned off.
Use Config Save when you are done with a configuration session.
If you log out of the web configurator without saving configuration changes, a screen displays
as shown. Click Yes to save the changes or click No if you do not want to save the changes.
Unsaved changes are lost when the switch's power is turned off.
Figure 17 Web Configurator: Save Configuration on Logout

3.5 Logging Out of the Web Configurator

Click Logout in a screen to exit the web configurator. You have to log in with your password
again after you log out. This is recommended after you finish a management session both for
security reasons and so as you don't lock out other switch administrators.
Figure 18 Web Configurator: Logout Screen

3.6 System Info

The System Info screen is the first screen that displays when you access the web configurator.
MSC1000G/1024G/1224G Series User's Guide
Chapter 3 The Web Configurator
73