Show Voip H248 Termination Info Command; Show Voip H248 Termination State Command - ZyXEL Communications MSC1024G Series User Manual

This example shows the status of the H.248 interface 1's media card 1.
ras> show voip h248 media 1 1
media id
media ip
management inband ip : 172.23.19.236
management outband ip: 192.168.0.1
slot id
port count
state

33.3.41 show voip h248 termination info Command

Syntax:
show voip h248 termination info *|<id>-<media>-<port> | <id> <name>
where
id
media
name
This command displays H.248 termination setting and status information.
This example shows the H.248 termination status of the H.248 interface 1's media card 1.
ras> show voip h248 termination info 1-1-1
media id
media ip
management inband ip : 172.23.19.236
management outband ip: 192.168.0.1
slot id
port count
state
Port 1

33.3.42 show voip h248 termination state Command

show voip h248 termination state *|<id>-<media>-<port> | <id> <name>
where
id
media
name
This command displays the specified card's H.248 termination status details.
MSC1000G/1024G/1224G Series User's Guide
: 1
: 192.168.3.174
: 3
: 48
: registered
The number of the H.248 interface (1~16).
The number of the media card (1~27).
The name of an H.248 termination.
: 1
: 192.168.3.174
: 3
: 48
: registered
: A301
The number of the H.248 interface (1~16).
The number of the media card (1~27).
The name of an H.248 termination. Use up to 64 ASCii characters.
Chapter 33 show Commands
865