ZyXEL Communications MSC1024G Series User Manual page 431

Figure 288 Port Statistics: IMA Line Card
The following table describes the labels in this screen.
Table 200 Port Statistics: IMA Line Card
LABEL
Port
Admin State
Line Code
Impedance
Alarm Status
MSC1000G/1024G/1224G Series User's Guide
DESCRIPTION
This field displays the port number.
This field displays whether the port is activated (In of Service) or not
(notInService).
This field displays the type of E1 line codes that help prevent signal loss during
transmission. Both devices must use the same coding type.
hdb3: High Density Bipolar of order 3 code
ami: Alternate Mark Inversion
This field displays the impedance in ohms used on the port.
This field displays the name(s) of alarm(s) that have occurred on the port.
Chapter 14 Statistics Screens
431