Igmp Status Screen - ZyXEL Communications MSC1024G Series User Manual

Table 177 MAC Table (continued)
LABEL
Total Mac
Index
Vid
MAC Address
Port
Page X of X
Previous/Next

14.6 IGMP Status Screen

Click Statistics > IGMP Status in the navigation panel to display the following screen. Use
this screen to view information collected by IGMP snooping and/or IGMP proxy.
Figure 264 IGMP Status
The following table describes the labels in this screen.
Table 178 IGMP Status
LABEL
IGMP Mode
VID
Flush
MSC1000G/1024G/1224G Series User's Guide
DESCRIPTION
This is the total number of connected MAC addresses that the system has learned
are connected.
This is the number of the MAC table entry.
This is the VLAN group to which the device belongs.
This is the MAC address of the device that the system has learned is connected to
the port.
This is the port to which the MAC address is associated.
This identifies which page of information is displayed and the total number of pages
of information.
Click one of these buttons to show the previous/next screen if all of the information
cannot be seen in one screen.
DESCRIPTION
This displays whether the system is snooping multicast traffic, proxying multicast
traffic, or ignoring multicast traffic.
Select a VLAN ID and click Load to bring the multicast group information in the VLAN
to this screen.
Click Flush to reset the counters.
Chapter 14 Statistics Screens
401