Port Gbond Set Command; Port Gbond Show Command; Port Gbond Delete Command - ZyXEL Communications MSC1024G Series User Manual

Chapter 31 port Commands

31.11.1 port gbond set Command

Syntax:
port gbond set <slot> <bond_name> <portlist>
where
<slot>
<bond_name>
<portlist>
This command sets up a gbond group on the specified group of ports on a slot. The following
is an example.
ras> port gbond set 2 group2 3,4

31.11.2 port gbond show Command

Syntax:
port gbond show <slot> [<bond_name>]
where
<slot>
<bond_name>
This command displays gbond settings on the specified group of ports on a slot. The following
is an example.
ras> port gbond show 2
slot bond name
port list
---- ------------------------------------
2 Group1
1,2
2 group2
3,4

31.11.3 port gbond delete Command

Syntax:
port gbond delete <slot> <bond_name>
where
<slot>
<bond_name>
716
The line card ID.
=
A descriptive name for the gbond group of DSL lines.
=
The ports on a line card that connect the DSL lines on which gbond is
=
configured.
The line card ID.
=
A descriptive name for the gbond group of DSL lines.
=
The line card ID.
=
A descriptive name for the gbond group of DSL lines.
=
MSC1000G/1024G/1224G Series User's Guide