Chapter 31 port Commands
31.5 port copy Command
Syntax:
port copy <source> <destination>
where
<source>
<destination>
This command copies the port settings from a source port to destination ports on the same type
of line card.
The following example copies the settings from port 5 on the line card in slot 7 to all of the
ports on the line card in slot 7.
ras> port copy 7-5 7-*
31.6 port disable Command
Syntax:
port disable <slot-port>
This command turns off the specified subscriber port(s).
The following example turns off port 5 on the line card in slot 7.
ras> port disable 7-5
31.7 DTPVC Commands
This section covers how to configure Double-Tag Permanent Virtual Circuits (DTPVCs) for
ADSL or SHDSL subscriber ports. See
31.7.1 dtpvc delete command
Syntax:
port dtpvc delete <slot-port-vpi/vci>
This command removes the specified DTPVC. The following example removes DTPVC 8/35
from port 1 on the line card in slot 5.
ras> port dtpvc delete 5-1-8/35
708
The slot and port number from which you want to copy settings.
=
=
The slot and port number(s) to which you want to copy settings.
Section 11.29 on page 297
MSC1000G/1024G/1224G Series User's Guide
for more on DTPVCs.