The following example displays the default alarm ADSL profile (DEFVAL).
ras> profile alarmadsl show DEFVAL
adsl alarm profile : DEFVAL
15MinLofs(lofs)
15MinLoss(loss)
15MinLols(lols)
15MinLprs(lprs)
15MinESs(ess)
15MinFailedFastR(ffr)
15MinSesL(sesl)
15MinUasL(uasl)
FastRateUp(fru)
InterleaveRateUp(iru)
FastRateDown(frd)
InterleaveRateDown(ird) (kbps):
InitFailureTrap(ift)
ras>
32.6.2 profile alarmadsl set Command
Syntax:
profile alarmadsl set <profile> atuc [lofs <lofs>] [loss <loss>] [lols
<lols>][lprs <lprs>] [ess <ess>] [ffr <ffr>] [sesl <sesl>] [uasl <uasl>] [fru
<fru>] [iru <iru>] [frd <frd>] [ird <ird>] [ift <ift>]
or <profile> atur [lofs <lofs>] [loss <loss>] [lprs <lprs>][ess <ess>] [sesl
<sesl>] [uasl <uasl>] [fru <fru>][iru <iru>][frd <frd>] [ird <ird>]
where
<profile>
atuc
atur
<lofs>
<loss>
<lols>
<lprs>
<ess>
<ffr>
<sesl>
MSC1000G/1024G/1224G Series User's Guide
---------- ----------
(sec):
(sec):
(sec):
(sec):
(sec):
(sec):
(sec):
(sec):
(kbps):
(kbps):
(kbps):
:
A name for the alarm profile (up to 31 English keyboard characters).
=
Downstream. These parameters are for the connection (or traffic) going
=
from the IES to the subscriber's device.
=
Upstream. These parameters are for the connection (or traffic) coming from
the subscriber's device to the IES.
=
The number of Loss Of Frame Seconds (0~900) that are permitted to occur
within 15 minutes.
=
The number of Loss Of Signal Seconds (0~900) that are permitted to occur
within 15 minutes.
=
The number of Loss Of Link Seconds (0~900) that are permitted to occur
within 15 minutes.
=
The Number of Loss of PoweR seconds (0~900) permitted to occur (on the
ATUR) within 15 minutes.
=
The number of Errored SecondS (0~900) that are permitted to occur within
15 minutes.
=
The number of Failed Fast Retrain seconds (0~900) that are permitted to
occur within 15 minutes.
=
The number of Severely Errored Seconds (0~900) that are permitted to
occur within 15 minutes.
Chapter 32 profile Commands
atuc
atur
0
0
0
0
0
-
0
0
0
0
0
-
0
0
0
0
0
0
0
0
0
0
0
0
-
-
775