Alarm Clear Screen; Alarm Input Screen - ZyXEL Communications MSC1024G Series User Manual

Chapter 6 Alarm Screens
Table 48 Alarm Descriptions (continued)
ALARM
DS1_24HR_ES_TCA
DS1_24HR_SES_TCA
DS1_24HR_UAS_TCA
A. These alarms apply to the VLCs that follow the VDSL2 MIB (defined in draft-ietf-adslmib-vdsl2-06).

6.6 Alarm Clear Screen

Click Alarm > Alarm Clear to open this screen where you can erase alarm entries.
Figure 84 Alarm Clear
The following table describes the labels in this screen.
Table 49 Alarm Clear
LABEL
Current Alarm
History Alarm
Alarm output
Cutoff

6.7 Alarm Input Screen

Click Alarm > Alarm Input to open the following screen. Use this screen to configure names
for the external alarm inputs so it is easier to identify the cause of an alarm.
166
SEVERITY MSC ALC SLC VLC VOP IMA DESCRIPTION
minor
minor
minor
DESCRIPTION
Click Clear to manually remove the records of all the current alarms that are
clearable.
Click Clear to manually remove the records of all the historical (past) alarms that are
clearable. Use the drop-down list box to select the severity level of alarms that you
want to remove.
Click Cutoff to cancel an alarm. This stops the sending of the alarm signal current.
This is useful in stopping an alarm if you have the alarm output connector pins
connected to a visible or audible alarm. The alarm entry remains in the system.
X The Error Seconds within the
last 24 hours on the E1 line has
reached the threshold.
X The Severely Errored Seconds
within the last 24 hours on the
E1 line has reached the
threshold.
X The UnAvailable Seconds within
the last 24 hours on the E1 line
has reached the threshold.
MSC1000G/1024G/1224G Series User's Guide