32.16 profile vdsl commands
Use the
profile vdsl
32.16.1 profile vdsl delete command
Syntax:
profile vdsl delete <profile>
where
<profile>
This command allows you to delete an individual shdsl profile by its name. You cannot delete
a profile that is assigned to any of the DSL ports in the system. Assign a different profile to
any DSL ports that are using the profile that you want to delete, and then you can delete the
profile.
The following example deletes the
ras> profile vdsl delete standard
32.16.2 profile vdsl map command
Syntax:
profile vdsl map <profile>
This command displays which VDSL ports reference a specific profile.
The following example displays which VDSL ports use the
ras> profile shdsl map standard
32.16.3 profile vdsl set command
Syntax:
profile vdsl set <profile> <us-max-rate> <ds-max-rate> [fast|delay <us-delay>
<ds-delay>] [minrate <us-min-rate> <ds-min-rate>] [usmgn <us-max-mgn> <us-
min-mgn> <us-tgt-mgn>] [dsmgn <ds-max-mgn> <ds-min-mgn> <ds-tgt-mgn>]
where
<profile>
<us-max-rate>
<ds-max-rate>
MSC1000G/1024G/1224G Series User's Guide
commands to configure VDSL profiles.
A profile name.
=
standard
=
The descriptive name for the profile. Up to 31 characters.
=
The maximum VDSL upstream transmission rate, 64~45440 in
Kbps. The upstream rate must be less than or equal to the
downstream rate.
=
The maximum VDSL downstream transmission rate, 64~100032 in
Kbps.
Chapter 32 profile Commands
VDSL profile.
profile.
standard
795