C
H A P T E R
This chapter describes the configuration file management commands.
25.1 config Commands Summary
The following table lists the
administrator privilege level needed to use the command (H for high, M for middle or L for
low).
Table 313 config Commands
COMMAND
config
default
save
show
25.1.1 config default Command
Syntax:
ras> config default
This command resets the system to the factory default configuration. The system restarts with
the factory default settings.
Do not turn off your device while returning to the default configuration.
25.1.2 config save Command
Syntax:
ras> config save
MSC1000G/1024G/1224G Series User's Guide
config Commands
commands. The P column on the right indicates the
config
sys|ip|switch|po
rt|profile|acl|v
lan|multicast|al
l [nopause]
25
DESCRIPTION
Resets factory default configuration.
Saves current configuration to non-
volatile memory.
Displays the current configuration.
P
H
M
L
629