Detailed Msc Ethernet Port Statistics - ZyXEL Communications MSC1024G Series User Manual

Chapter 14 Statistics Screens
Figure 271 MSC Port Statistics: ENET
The following table describes the labels in this screen.
Table 185 MSC Port Statistics: ENET
LABEL
Flush
Slot/Port
Status
Uptime
RxPkts/ TxPkts
Rx Kbps/ Tx kbps
Errors
Rate
Poll Interval(s)
Stop

14.11.2 Detailed MSC Ethernet Port Statistics

To view detailed port statistics on a selected MSC Ethernet port, click the port index number in
the ENET screen.
408
DESCRIPTION
Select a port or slot and click Flush to reset its counters.
This field displays the port name or slot number. "sub" and "up" refer to the
subtending and uplink Ethernet ports on the front panel of the MSC card. "Slot"
refers to a back panel Ethernet connection to one of the other cards. Click one of
these links to see detailed Ethernet port statistics.
This field displays whether the port is connected (up) or not (down).
This field displays how long the port has been running (or connected) since the
last time it was started.
This field displays the number of packets received/transmitted on this port
(including multicast, unicast, broadcast and bad packets).
This field displays the number of octets of Ethernet frames received/transmitted
per second counting the ones in bad packets, not counting framing bits but
counting FCS (Frame Check Sequence) octets. An octet is an 8-bit binary digit
(byte).
This field displays the number of error packets that have occurred on this port.
This field displays the transmission speed of the port.
The text box displays how often (in seconds) this screen refreshes. You may
change the refresh interval by typing a new number in the text box and then
clicking Set Interval.
Click Stop to stop port statistic polling.
MSC1000G/1024G/1224G Series User's Guide