Ipb Edgerouter Screen - ZyXEL Communications MSC1024G Series User Manual

Chapter 11 Subscriber Port Setup Screens
Table 108 IPB Domain (continued)
LABEL
Index
VLAN
Select
Select All
Cancel
Index
Name
DHCP VLAN
Select
Modify
Delete

11.17 IPB Edgerouter Screen

Use this screen to set up and maintain edge routers in an IP bridge. Edge routers are usually the
gateways that are provided to the subscribers. They can also be the gateways that are specified
in static routing table entries. If two edge routers are in different domains, it is possible for
them to have the same IP address.
To open this screen, click Port > IP Bridge > Edgerouter.
Figure 164 IPB Edgerouter
266
DESCRIPTION
This field displays the index number of the VLAN in the domain.
This field displays the ID of each VLAN in the domain.
Select the check box in the Select column for an entry and click Delete to
remove the entry.
Note: You have to delete every IP bridge setting (including DHCP
VLAN) that uses the selected VLAN before you can
remove it from the domain.
Click this to select all entries in the table.
Click Cancel to start configuring this section of the screen again.
This field displays the number of the domain.
This field displays the name of each domain.
This field displays the VLAN where the domain's DHCP server is located (or
disabled if there is no DHCP server for the domain).
Select the radio button in the Select column for an entry. Click Modify to edit
the entry or Delete to remove it.
MSC1000G/1024G/1224G Series User's Guide