ZyXEL Communications MSC1024G Series User Manual page 442

Chapter 14 Statistics Screens
Figure 299 MSTP Statistics: MSTI
The following table describes the labels in this screen.
Table 211 MSTP Statistics: MSTI
LABEL
MSTID
BridgeID
TimeSinceTopoCh
ange
TopoChangeCount This is the number of times the spanning tree has been reconfigured.
TopoIsChanging
IntRootPathCost
IntRootID
IntPortPathCost
Port Info.
sub1~up2
Enable
Uptime
State
PortID
DsgBridgeID
DsgPortID
IntRootPathCost
IntRootID
442
DESCRIPTION
Select an MSTI number and click Apply to display the port status for that
spanning tree instance.
This is the unique identifier for this bridge, consisting of bridge priority plus MAC
address.
This is the time since the spanning tree was last reconfigured.
The spanning tree is currently reconfiguring if "True" displays.
This field displays path cost to the internal root bridge.
This field displays the ID of the root switch in a region.
This is the path cost to the internal root bridge.
These are the MSC's subtending and uplink Ethernet ports.
This field displays whether a port is active or not.
This field displays the time the port is running.
This field displays the STP status on this port.
This field displays port ID.
This is the unique identifier for the bridge in the LAN segment to which this bridge
belongs that has the lowest path cost to reach the root bridge, consisting of bridge
priority plus MAC address.
This is the port on the designated bridge that has the lowest path cost to reach the
root bridge, consisting of bridge priority.
This field displays path cost to the internal root bridge.
This field displays the ID of the root switch in a region.
MSC1000G/1024G/1224G Series User's Guide