Cfm Endpoint: Mip Slot Screen - ZyXEL Communications MSC1024G Series User Manual

Managment switch card

Hide thumbs Also See for MSC1024G Series:

Table of Contents

Chapter 15 Switch Screens

Table 259 CFM Endpoint: MIP (continued)

15.17.4 CFM Endpoint: MIP Slot Screen

In the CFM Endpoint: MIP screen, click the ID of a line card to display the screen shown next.

This screen lists the MIP setting for each of the line card's ports.

Figure 351 CFM Endpoint: MIP > Slot

The following table describes the labels in this screen.

Table 260 CFM Endpoint: MIP > Slot

This field displays the line card's current operational status.

active means the line card is operating normally.

init means the MSC is initializing the line card.

disable means a manager has disabled the line card.

inactive means the line card is starting up or is not operating normally. This could

be due to the card starting, a firmware upgrade in progress or a malfunction. See

Section 39.7 on page 974

for what to do if the line card stays stuck in the inactive

This field displays the type of a line card.

This field displays how long the line card has been running since the last time it

was started.

This field displays the current firmware version installed on the line card.

This field displays the number of the DSL port.

This field displays whether or not the port is set to be a MIP.

MSC1000G/1024G/1224G Series User's Guide

Msc1224g series Msc1000g series