ZyXEL Communications MSC1024G Series User Manual page 844

Chapter 33 show Commands
The following table describes labels in this example.
Table 337 show lineinfo Command Display
LABEL
link
service type
coding mode
us interleave
delay
ds interleave
delay
us inp
ds inp
us output
power
ds output
power
country code
provider code
33.3.17.2 VoIP Line Card
The following example displays the line operating values for port 8 on the VoIP line card in
slot 4.
ras> show lineinfo 4-8
slot-port=4-8, VOP line info
sipLocalUri
sipRemoteUri
rtpTxCodecType : G.711a
rtpRxCodecType : G.711a
rtpTxPt
rtpRxPt
rtpLocalIp
rtpRemoteIp
rtpLocalPort
rtpRemotePort
844
DESCRIPTION
This displays the connection status of the DSL link.
This is the ADSL standard that the port is using.
Trellis coding helps to reduce the noise in ADSL transmissions. Trellis may reduce
throughput but it makes the connection more stable.
"RS" coding stands for Reed-Solomon error correction.
This is the numbers of milliseconds of interleave delay for upstream
transmissions.
This is the numbers of milliseconds of interleave delay for downstream
transmissions.
This is the number of impulse noise protection DMT symbols for upstream
transmissions.
This is the number of impulse noise protection DMT symbols for downstream
transmissions.
This is the power output of the subscriber's DSL modem or router. The total output
power of the transceiver varies with the line length and quality.
This is the DSP port's output power. The total output power of the transceiver
varies with the length and line quality. The farther away the subscriber's ADSL
modem or router is or the more interference there is on the line, the higher the
power will be.
This is the country code acquired from the subscriber's ADSL device during
negotiation/provisioning message interchanges. The country code is from the
Vendor ID (see ITU-T G.994.1).
This is the provider code acquired from the subscriber's ADSL device during
negotiation/provisioning message interchanges. The provider code includes the
Vendor ID and Version Number obtained from the Vendor ID.
: local1
: remote1
: 332
: 423
: 111.11.11.1
: 122.22.22.2
: 5060
: 5060
MSC1000G/1024G/1224G Series User's Guide