The following example sets an alarm profile named SESalarm that has the system send an
alarm trap and generate a syslog whenever the connection (from the IES to the subscriber) has
more than 3 severely errored seconds within a 15-minute period.
ras> profile alarmvdsl set SESalarm sesl 3
32.9.3 profile alarmvdsl delete Command
Syntax:
profile alarmvdsl delete <profile>
where
<profile>
This command allows you to delete an individual VDSL alarm profile by its name. You cannot
delete the DEFVAL alarm profile.
The following example deletes the SESalarm alarm profile.
ras> profile alarmvdsl delete SESalarm
32.9.4 profile alarmvdsl map Command
Syntax:
profile alarmvdsl map <profile>
where
<profile>
This command displays which VDSL ports are set to use the specified alarm profile.
The following example displays which VDSL ports use the SESalarm alarm profile.
ras> profile alarmvdsl map SESalarm
side
-- ---- -------------------------------------------------------------------
12345678901234567890123456789012345678901234567890123456789012345678
2
- ------------------------
3
- ------------------------
4
- ------------------------------------------------
5
- ------------------------------------------------
32.10 profile atm Commands
Use these commands to configure ATM traffic settings.
MSC1000G/1024G/1224G Series User's Guide
=
The name of an alarm profile.
The name of an alarm profile.
=
port
1
2
3
Chapter 32 profile Commands
4
5
6
7
783