Chapter 30 multicast Commands
30.5.2 multicast igmp fastleave disable Command
Syntax:
multicast igmp fastleave disable
This command deactivates multicast fastleave on the system.
30.5.3 multicast igmp fastleave timer Command
Syntax:
multicast igmp fastleave timer
This command sets the time a device has to leave a multicast group.
The following example specifies 10 seconds as the time the device has to leave a multicast
group.
ras> multicast igmp fastleave timer 10
30.6 multicast igmp Commands
Use these commands to enable or disable IGMP proxy or IGMP snooping.
30.6.1 multicast igmp disable Command
Syntax:
multicast igmp disable
This command deactivates IGMP on the system. All IGMP packets will be ignored.
30.6.2 multicast igmp enable Command
Syntax:
multicast igmp enable proxy|snooping [v2|v3]
This command turns on IGMP proxy or snooping using the specified version.
Use proxy to have the device use IGMP proxy. Use IGMP snooping to have the DSLAM
passively learn multicast groups.
If you use IGMPv2, the system discards IGMPv3 packets. This provides better security if none
of the devices in the network use IGMPv3. If you select IGMPv3, the system recognizes both
IGMPv2 and IGMPv3.
The following example sets the device to use IGMP proxy with IGMPv2.
ras> multicast igmp enable proxy v2
676
MSC1000G/1024G/1224G Series User's Guide