ZyXEL Communications MSC1024G Series User Manual page 278

Chapter 11 Subscriber Port Setup Screens
Figure 172 Port > G.bond
The following table describes the labels in this screen.
Table 115 Port > G.bond
LABEL
Slot
Group
Load
Name
278
DESCRIPTION
Select the number of a line card's slot to apply G.bond settings on traffic through
this card.
The group represents a bundle of DSL lines connecting the line card and CPE
DSL device.
Select a group from the drop-down list. If no groups have been configured yet,
click New to set up a new group.
Click Load to display the group's G.bond settings in the Name and Member
Port fields.
Use this section of the screen to display, set or edit a descriptive name for a
group of DSL lines.
Select a group in the Group drop-down list to display the group name in the
Name field.
Type a descriptive name for a group in this field or edit an existing name to set
up a new group.
MSC1000G/1024G/1224G Series User's Guide