Profile Profsvr Commands; Profile Profsvr Show Command; Profile Profsvr Mode Command; Profile Profsvr Clientlist Set Command - ZyXEL Communications MSC1024G Series User Manual

This command removes the specified IPQoS profile. Here is how to delete the EXAMPLE
IPQoS profile.
ras> profile ipqos delete EXAMPLE

32.13 profile profsvr Commands

Use these commands to configure the profile server feature settings.

32.13.1 profile profsvr show Command

Syntax:
profile profsvr show
This command displays the current profile server setting.
ras> profile profsvr show
mode :server mode
no Client Ip
---- ---------------
01

32.13.2 profile profsvr mode Command

Syntax:
profile profsvr mode client|server
This command sets the profile server operation mode.
ras> profile profsvr mode server

32.13.3 profile profsvr clientlist set Command

Syntax:
profile profsvr clientlist set <ip-address> <type>
where
<type>
This command adds an entry to the profile server client list. When the IES is in server mode,
use this command to add entries to the list of client IES's.
MSC1000G/1024G/1224G Series User's Guide
type
------
1.2.3.4 0
A profile client IES may have unused profiles on it (profiles that are not mapped
=
to any ports).
Use 0 to leave these unused profiles on the client IES when synchronizing the
profiles.
Use 1 to delete these unused profiles from the client IES when synchronizing
the profiles.
Chapter 32 profile Commands
789