Table of Contents
Advertisement
Chapter 4 Tutorials
Similarly, click IMA > DTPVC, select Slot 2 and Group 2, then click Load. Create a
DTPVC using VPI/VCI 0/34, Svid/Spri 100/0, Cvid/Cpri 20/0, MUX llc and Profile
DEFVAL for the settings. Then click Apply.
Figure 37 Creating a DTPVC Example
Click IMA > MGTPVC, select Slot 2 and Group 2, then click Load. Create an
MGTPVC using VPI/VCI 0/35, PVID/Priority 1/0, Profile DEFVAL and MUX llc for
the settings. Leave both Ip and Gateway fields as their defaults. Then click Apply.
Figure 38 Creating an MGTPVC Example
The PVID that you set here for an MGTPVC must be the management VLAN
you are using on the IES. By default, it is VLAN 1. See
if you want to use a VLAN ID other than 1 or 0.
You should now be able to transmit and receive data between the IMA devices.
88
Section 4.4 on page 89
MSC1000G/1024G/1224G Series User's Guide
Advertisement
Table of Contents
Troubleshooting
