ZyXEL Communications MSC1024G Series User Manual page 74

Chapter 3 The Web Configurator
Figure 19 Web Configurator: Home Screen (System Info)
The following table describes the labels in this screen.
Table 5 System Info (Home)
LABEL
Current Alarm
Critical Alarms
Major Alarms
Minor Alarms
ID
48V power
State
Card Type
Up Time
Firmware
Over Heat
Voltage Failure
74
DESCRIPTION
Click the links to view detailed alarm information (see
This field displays the number of critical alarms that have occurred. Click the link to
display the Current Alarm: Critical Alarm screen.
This field displays the number of major alarms that have occurred. Click the link to
display the Current Alarm: Major Alarm screen.
This field displays the number of minor alarms that have occurred. Click the link to
display the Current Alarm: Minor Alarm screen.
This is the slot number of a line card. Click the index number of an active line card
to display the System Info - Slot screen to view detailed status.
This displays whether or not the chassis's power (48 volt) module inputs are
receiving power.
This field displays the line card's current operational status.
active means the line card is operating normally.
init means the MSC is initializing the line card.
disable means a manager has disabled the line card.
inactive means the line card is starting up or is not operating normally. This could
be due to the card starting, a firmware upgrade in progress or a malfunction. See
Section 39.7 on page 974 for what to do if the line card stays stuck in the inactive
state.
This field displays the type of a line card.
This field displays how long the line card has been running since the last time it
was started.
This field displays the current firmware version installed on the line card.
This field indicates whether the temperate of the line card is too high.
This field indicates whether the voltage on the line card is out of the tolerance
range.
Section 6.1 on page
MSC1000G/1024G/1224G Series User's Guide
143).