Ieee 802.1X - ZyXEL Communications MSC1024G Series User Manual

Chapter 5 Access Control List Screens
The following table describes the labels in this screen.
Table 26 Packet Filter: Slot
LABEL
UP
Copy
Slot
Accept All,
PPPoE Only,
PPPoE, IP, ARP,
NetBIOS, DHCP,
EAPOL, IGMP
Select

5.11 IEEE 802.1x

This section describes the IEEE 802.1x authentication method and RADIUS server connection
setup.
IEEE 802.1x is an extended authentication protocol
Authentication Dial In User Service, RFC 2138, 2139) for centralized user profile
management on a network RADIUS server.
1. Not all Windows operating systems support IEEE 802.1x (see the Microsoft web site for details). For other
operating systems, see its documentation. If your operating system does not support IEEE 802.1x, then you
may need to install IEEE 802.1x client software.
118
DESCRIPTION
Click UP to go back to the previous screen.
Do the following to copy settings from one port to another port or ports.
1. Select the Select radio button of the port from which you want to copy settings
2. Click Copy.
3. Select to which line card you want to copy the settings.
4. Select to which ports on the line card you want to copy the settings. Use Select
All to select every port. Use Select None to clear all of the check boxes.
5. Click Apply to paste the settings.
This field displays the number of the DSL port.
These are the packet filter settings for each port.
Accept All and PPPoE Only: "V" displays for the packet types that the system is
to accept on the port. "-" displays for packet types that the system is to reject on
the port.
PPPoE, IP, ARP, NetBIOS, DHCP, EAPOL and IGMP: "V" displays for the packet
types that the system is to reject on the port. "-" displays for packet types that the
system is to accept on the port.
Select the radio button of the port from which you want to copy settings.
1
that allows support of RADIUS (Remote
MSC1000G/1024G/1224G Series User's Guide