Ipbpvc By Slot Screen - ZyXEL Communications MSC1024G Series User Manual

Table 112 IPBPVC: VLAN Setup (continued)
LABEL
Apply
Cancel
Index
VPI/VCI
VID
Registration
Tag
Select
Modify
Delete

11.19.2 IPBPVC by Slot Screen

This screen displays all of the IPB PVCs on a particular line card.
To open this screen, click Port > IP Bridge > IPBPVC and then the index number of an
active line card that supports PVC.
Figure 168 IPBPVC: Slot
The following table describes the labels in this screen.
Table 113 IPBPVC: Slot
LABEL
UP
Delete, Select
Index
MSC1000G/1024G/1224G Series User's Guide
DESCRIPTION
Click Apply to save changes on the selected IPB PVC.
Clicking Apply saves your changes to the MSC's volatile memory. The MSC
loses these changes if it is turned off or loses power, so use the Config Save
link on the navigation panel to save your changes to the non-volatile memory
when you are done configuring.
Click Cancel to start configuring the screen again.
This field displays the index number of a IPB PVC on this port.
This field displays the Virtual Path Identifier (VPI) and Virtual Circuit Identifier
(VCI). The VPI and VCI identify a IPB PVC (a channel).
This is the VLAN ID to which this channel belongs.
This field displays fixed to indicate that the port is a member of the specified
VLAN.
This field displays V if the line card is to tag all frames that are transmitted out
on this PVC with this VLAN group ID. It displays - if the line card does not tag all
frames that are transmitted out on this PVC with this VLAN group ID.
Select the radio button in the Select column for an entry and click Modify to be
able to edit the entry, or Delete to remove the entry.
Select the radio button in the Select column for an entry and click Modify to be
able to edit the entry.
Select the radio button in the Select column for an entry and click Delete to
remove the entry.
DESCRIPTION
Click UP to go back to the previous screen.
Select an entry's Select check box and click Delete to remove the entry.
This field displays the index number of a IPB PVC on this slot. Click the index
number to go to a screen where you can configure the IPB PVC's VLAN settings
(see Section 11.19.1 on page
Chapter 11 Subscriber Port Setup Screens
272).
273