C
H A P T E R
This chapter describes the
27.1 General ima Command Parameters
The following table describes commonly used
Table 317 General diagnostic Command Parameters
NOTATION
slot-port
slot-gid
pvc
slot-group-
vpi/vci
gid
llc|vcmux
pvid
priority
profile
27.2
Commands Summary
ima
The following table lists the
administrator privilege level needed to use the command (H for high, M for middle or L for
low).
Table 318 ima Commands
COMMAND
ima
dtpvc
MSC1000G/1024G/1224G Series User's Guide
ima Commands
commands.
ima
DESCRIPTION
The number of a slot and a port on the slot. For example, 2-5 means port 5 on slot
2.
The number of a slot and an IMA group on the slot. For example, 2-1 means group
1 on slot 2.
The number of a VPI and VCI. A VPI and VCI identifies a channel.
An IMA line card inserted in a slot, an IMA group configured on that line card, and
the VPI/VCI settings for the E1 line connected to that port, for example,: 3-1-0/
33.
The ID of an IMA group (1~8).
The encapsulation method used for this channel, llc or vcmux.
Default VLAN ID, 1~4094
Default priority, 0~7
An ATM profile that will be applied to the specified channel.
commands. The P column on the right indicates the
ima
set
<slot-group-vpi/
vci> <profile>
<llc|vcmux> <svid>
<spri> <cvid>
<cpri>
delete
<slot-group-vpi/
vci>
command parameter notation.
ima
DESCRIPTION
Sets a double-tagged PVC's (DTPVC's)
settings.
Deletes the specified IMA PVC.
27
P
M
M
645