28.2.10 ip tracert Command
Syntax:
ras> ip tracert <ip-address>
This command sends a traceroute packet to the IP address (in the field to the left) and uses the
response to determine the path a packet takes to that IP address.
The following example displays route information to an Ethernet device with an IP address of
123.23.19.11.
ras> ip tracert 123.23.19.11
Resolving 123.23.19.11... traceroute to 123.23.19.11 (123.23.19.11), 30 hops
max
, 40 byte packet
1:123.23.14.254
2:123.23.19.11
traceroute done:
MSC1000G/1024G/1224G Series User's Guide
(0 ms) (0 ms) (0 ms)
(0 ms) (0 ms) (0 ms)
Chapter 28 ip Commands
663