ZyXEL Communications MSC1024G Series User Manual page 761

Table 327 profile Commands (continued)
COMMAND
shdsl
vdsl
MSC1000G/1024G/1224G Series User's Guide
delete <profile>
map <profile>
set <profile> <min-
rate> <max-rate>
[<annex>
<wire_pair> <pms>
[margin]]
show [<profile>]
delete <profile>
map <profile>
Chapter 32 profile Commands
DESCRIPTION
Removes an unreferenced SHDSL
port settings profile.
Displays which SHDSL ports reference
this profile.
Creates a profile of SHDSL port
settings.
min-rate: The minimum rate
(192~4096 Kbps).
max-rate: The maximum rate
(192~4096 in Kbps).
The regional setting.
annex:
Choose annexa|annexb
wire-pair: The number of wire
pairs to be used. Choose
2wire|4wire|mpair4.
pmms: Line probing. Options are:
lp_off: Disables the line probe.
lp_on_cur: Enables the line
probe based on the current target
SNR margin.
lp_on_wc: Enables the line probe
based on the worst case target snr
margin.
curr-margin: The current
condition target SNR margin (-10~21
dB).
margin: The current noise margin or
worst case noise margin (-10~21 dB).
Lists the SHDSL port setting profiles or
a specific profile's settings.
Removes a VDSL port settings profile.
Displays which VDSL ports reference
this profile.
P
M
L
M
:
L
M
L
761