Chapter 11 Subscriber Port Setup Screens
Figure 138 VDSL Port Setup: Advanced (ctd.)
The following table describes the fields in this screen.
Table 87 VDSL Port Setup: Advanced
LABEL
Index
Enable
Start
End
Apply
Cancel
232
DESCRIPTION
This field displays the index number.
Select Enable to activate the RFI band.
Enter the start of the frequency range in kilohertz (kHz).
Enter the end of the frequency range in kHz.
Click Apply to save the changes in this screen to the system's volatile memory.
The system loses these changes if it is turned off or loses power, so use the
Config Save on the navigation panel and then the Save button to save your
changes to the non-volatile memory when you are done configuring.
Click Cancel to begin configuring the fields again.
MSC1000G/1024G/1224G Series User's Guide