Advanced Sip Port Setup Screen - ZyXEL Communications MSC1024G Series User Manual

Chapter 11 Subscriber Port Setup Screens

11.24 Advanced SIP Port Setup Screen

Use this screen to configure the VoIP settings of a port on your SIP VoIP line card. Click a port
number in the Port SIP Setup Line Card screen (see
following screen displays.
The fields that display in this screen are the same as those in the SIP Port
Setup screen (see
Figure 177 The Advanced Port SIP Setup Screen
The following table describes the labels in this screen.
Table 118 The Advanced Port SIP Setup Screen
LABEL
UP
Enable
Customer Information
TEL
SIP Profile
Call Service Profile
DSP Profile
284
Section 11.22 on page
DESCRIPTION
Click this to return to the Port SIP Setup Line Card screen.
Select the check box to activate SIP-based VoIP on this port.
Enter information to identify the subscriber connected to this port. You can
use up to 31 printable ASCII characters (including spaces and hyphens).
Enter the telephone number of the subscriber VoIP port. This is used as
part of the port's SIP URI.
Select the SIP profile the port is to use. If you have not configured any
profiles, only the default profile DEFVAL can be selected. Configure SIP
profiles in the Profile > VoIP SIP screen.
Select the call service profile the port is to use. If you have not configured
any profiles, only the default profile DEFVAL can be selected. Configure
call service profiles in the Profile > VoIP SIP CALLSVC screen.
Select the digital sound processing profile the port is to use. If you have
not configured any profiles, only the default profile DEFVAL can be
selected. Configure DSP profiles in the Profile > VoIP DSP screen.
MSC1000G/1024G/1224G Series User's Guide
Section 11.23 on page
279).
282). The